







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Garland, TX
A tub-to-shower conversion in Garland typically costs $5,800 to $13,500, takes three to five working days, and swaps a dated alcove tub for a curbless or low-threshold shower that fits the same footprint. Most Garland homes built between 1965 and 1995 still have the original cast-iron or fiberglass tub, and the tub apron hides water damage that only shows up once the surround comes off. We give you a written price before demo starts, a real arrival window, and a 365-Day Done Right Promise that covers what we install. Call (844) 560-4146 and a live person picks up, day or night.
This page covers the conversion specifically. For the wider planning picture, including full layouts, flooring and vanities, see our Bathroom Remodeling service.
Key Takeaways
- Typical Garland conversion runs $5,800 – $13,500, with most jobs landing near $8,900.
- Same-footprint conversions take 3 – 5 days. Moving the drain or valve adds time.
- Many Garland homes need a permit; we pull it and meet the inspector.
- Our technicians have up to 22 years of experience, and every job carries the written 365-Day Done Right Promise.

When You Need Tub-to-Shower Conversion
Most calls we get in Garland aren’t about style. They’re about a tub that stopped being useful. Here’s what tends to push the decision:
- You’ve stopped using the tub. If nobody has soaked in it in two years, you’re paying for floor space you never use. A walk-in shower in the same footprint opens the room up without changing the walls.
- Getting in and out has become risky. A standard tub wall is 14 to 16 inches high. In Garland’s two-story homes, that step-up over a wet acrylic floor is where most bathroom falls happen. A low-threshold shower with a built-in bench removes the hazard.
- The tub finish is failing. Peeling fiberglass or chipped enamel isn’t fixable with a refinishing kit for long. When the surface is gone, a new pan and tile surround is often the better spend.
- Water is getting behind the surround. This is the one that surprises people. In Garland neighborhoods like Buckingham and North Garland, we regularly find soft drywall and rusted framing behind tub surrounds in homes from the 1970s and 80s. The leak starts slow and shows up as a loose tile or a stain on the ceiling below.
- You’re prepping for aging in place. Grab bars, a fold-down seat and a handheld showerhead are cheaper to install during a conversion than to retrofit later.
- The room feels dark and cramped. Removing a tub and installing a glass panel lets light through where a solid tub wall used to block it.
Our Tub-to-Shower Conversion Process
We keep the sequence tight so you know what’s happening on each day. Here’s how a typical Garland conversion runs:
- On-site measure and written price. We measure the alcove, check the valve and drain location, and confirm whether the existing plumbing can stay. You get a written price before anyone touches a tool. It’s the number you’ll see on the invoice.
- Protect the house and demo. Floors get covered, the tub and surround come out, and we inspect the framing and subfloor for rot. If we find damage, we tell you and price the repair before we fix it. No surprise line items after the walls are open.
- Set the waterproofing correctly. This is where conversions fail when they’re done quickly. We install a cement board substrate (the moisture-resistant layer behind the tile) and a bonded waterproofing membrane like Schluter Kerdi over it, then flood-test the pan before any tile goes down.
- Install the shower and trim. New valve and trim, pan, tile, and fixtures. We work with American Standard and Toto fixtures often because both carry strong manufacturer backing on top of our own written guarantee.
- Clean, walk through, hand over paperwork. We leave the site cleaner than we found it, walk you through what was installed, and hand you the written guarantee. If something fails inside 365 days, we come back and fix it at no charge, with no service call fee.

Tub-to-Shower Conversion Pricing in Garland
Here’s the honest range. Every Garland job is priced in writing before work starts, but the ballpark below helps you plan.
| Scope | Typical Range |
|---|---|
| Basic conversion, same footprint, acrylic or fiberglass pan | $5,800 – $8,200 |
| Mid-range conversion, tile walls, glass panel, bench | $8,200 – $11,000 |
| Higher-end, curbless entry, custom tile, premium fixtures | $11,000 – $13,500+ |
| Drain relocation or valve replacement | $450 – $1,400 |
| Grab bars and accessibility hardware | $250 – $900 |
What drives the number up or down:
- Tile vs. acrylic surround. Tile is more durable and lasts longer, but takes more labor. Acrylic panels are faster and cheaper.
- Curbless vs. threshold. A curbless entry means rebuilding the pan and often moving the drain. That’s the single biggest cost swing.
- Hidden water damage. Rot in the framing or subfloor gets priced before we fix it, not after.
- Permits. Many Garland conversions require one. We pull it as part of the job.
- Fixture tier. A basic trim kit and a premium thermostatic valve are hundreds of dollars apart.
Estimates are free, and the second visit is free too if you want to think it over. Call (844) 560-4146 for a written number you can hold us to.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Garland?
Most Garland conversions fall between $5,800 and $13,500, with a typical job near $8,900. The range depends on whether you choose tile or acrylic, whether the drain has to move, and any hidden water damage found after demo. We price all of that in writing before work starts, so the number on day one is the number on the invoice. Call (844) 560-4146 for a free written estimate.
Can you do a tub-to-shower conversion in the same footprint?
Yes. Most conversions keep the existing alcove, valve and drain exactly where they are, which is why the work usually finishes in three to five working days. The tub comes out, waterproofing goes in, and the new pan and surround go back into the same opening. If you want a curbless entry, we check the framing depth first and tell you what it will take before we commit to a date.
Do I need a permit for a tub-to-shower conversion in Garland?
Often, yes. A conversion that involves plumbing changes or a new shower pan generally requires a permit through the City of Garland. We handle the paperwork and meet the inspector on your behalf so you’re not chasing a city office. If a job truly doesn’t need one, we’ll tell you that too.
What happens if something fails after the conversion?
We come back and fix it at no charge. Every job carries our 365-Day Done Right Promise in writing. If the repair fails inside that window, we return, and there’s no service call or re-inspection fee. Call (844) 560-4146 and a real person answers, 24/7, to schedule the return visit.
Why Garland Homeowners Choose Penhallow Remodeling Garland
We operate as part of the Kingswell family of companies, which has set the standard for written pricing and written guarantees since 2004. That means on your Garland conversion, you get a written price before work starts, a defined arrival window, a clean job site, and a written guarantee on the finished shower. Every technician is background-checked and arrives in uniform, so you know exactly who’s walking into your home.
Our technicians have up to 22 years of experience, and the brands we install, from Schluter waterproofing to American Standard and Toto fixtures, carry their own manufacturer warranties alongside ours. For the parent service and full-scope remodel planning, visit our home page.
Ready to get a written number? Call (844) 560-4146 for a free estimate on your Garland tub-to-shower conversion. A live person answers, day or night, and we’ll set a real arrival window before we pick up a tool.
Written by the team at Penhallow Remodeling Garland, serving Garland.


