







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Bathroom Remodeling in Garland: What to Know First
Delta bathroom remodeling in Garland typically runs $9,000 – $28,000, and most full bathrooms we take on finish in two to four weeks depending on tile scope, layout changes and fixture lead times. We give you a written price before any demo starts, so the number you agree to is the number on the invoice. This page is for Garland homeowners who already have Delta fixtures, showers or valves in the bathroom and want the remodel done without voiding the warranty or repeating whatever failed the first time.
We’re an independent Delta service provider – not affiliated with or authorized by Delta – and our technicians have up to 22 years of experience working with Delta hardware across Garland neighborhoods like Firewheel, Club Hill, Duck Creek and the older blocks near downtown. Call (844) 560-4146 to schedule a free estimate.
How Delta Products Fail – and How We Fix Them

Delta builds solid hardware, but every brand has failure patterns that show up in real bathrooms. Here’s what we actually see on Delta jobs in Garland and what the fix looks like.
- Monitor 14 and 17 shower valves that stop balancing temperature. The pressure-balancing spool inside the cartridge wears out after years of Garland’s hard water, and the symptom is a shower that swings scalding when someone flushes a toilet. We replace the cartridge and, where the valve body is scored, recommend a full rough-in swap during the remodel so you’re not chasing the same failure twice.
- Delta single-handle kitchen-style cartridges adapted to bath vanities. In older Garland bathrooms it’s common to find a Delta 520 or similar faucet that’s been drip-dripping for years. The seat and springs are a $6 part, but once the faucet body is pitted from mineral buildup, rebuild kits don’t hold. We test the body before recommending a rebuild versus a Kohler or Moen replacement.
- Delta In2ition two-in-one shower heads with cracked diverter seals. The handheld-to-fixed diverter is the weak point – the seal hardens and you get a split stream or a leak behind the wall. Our fix is a Delta OEM seal kit, not an aftermarket generic, because the aftermarket versions we’ve tried don’t seat the same.
- Delta Classic and Foundations tub/shower surrounds with silicone breakdown at the flange. The caulk line where the surround meets the tub fails first, and water wicks behind into the drywall. That’s a substrate problem, not a caulk problem – we pull the surround, replace the cement board substrate (the moisture-resistant layer behind your tile), and reset with Delta-compatible trim.
- Aged Delta HydroRain or H2Okinetic shower systems with restricted flow from scale. The internal flow restrictors clog with the same minerals that spot your glass. Sometimes a soak-and-clean works; often the head needs replacement, and we’ll tell you which one actually makes financial sense before quoting.
A specific Garland detail worth knowing: our water runs hard, and Delta’s thermostatic and pressure-balancing cartridges show wear noticeably faster here than in soft-water markets. If you’re already remodeling, replacing the cartridge during the rough-in costs a fraction of doing it as a separate service call two years from now.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Delta Bathroom Remodeling Process
Here’s what a Delta-focused bathroom remodel looks like from the first call to the last wipe-down.
- 1
Diagnostics on the existing Delta hardware. We test every valve, cartridge, shower head and faucet in the bathroom, note the model lines, and photograph the rough-in so we know what we’re working with before demo.
- 2
Parts decision: OEM versus aftermarket. Delta OEM cartridges and trim kits cost more up front but hold up better in Garland’s water. We show you both options and the price difference in writing, then let you decide.
- 3
Written price before any work starts. Line-item quote covering demo, substrate, tile, fixtures, labor and permit pulls. No verbal ballparks, no “we’ll see once we open the wall.”
- 4
The remodel itself. Delta trim and fixtures installed to spec so the manufacturer warranty stays intact; cement board substrate behind all wet-area tile; permits pulled and inspected where Garland code requires.
- 5
The test. We pressurize every valve, run every shower head and faucet, and check for leaks at the wall before we call the job done.
- 6
The guarantee. Every Penhallow job carries our 365-Day Done Right Promise in writing. If something we installed fails inside the year, we come back and make it right at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Delta Bathroom Remodeling Costs in Garland

Here are the ranges we quote most often on Delta-focused bathroom work in Garland. These are real numbers, not a teaser range.
| Project | Typical Range |
|---|---|
| Full Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
The price moves most on tile square footage, whether the valve body needs replacing versus a cartridge rebuild, and layout changes that relocate plumbing. A simple Delta trim refresh with new tile in the same footprint lands near the low end; a full gut with a new shower valve, custom tile and vanity lands near the top. Call (844) 560-4146 for a written, line-item quote – estimates are free.
Why Garland Homeowners Call Penhallow Remodeling Garland for Delta Work
Most of the Garland homeowners we work with have already had one contractor start strong and finish weak. We built the way we work around that experience.
Every job carries our 365-Day Done Right Promise in writing. Every project gets a written price before any work starts, an arrival window we actually hit, and a clean job site at the end of each day – that’s The Kingswell Way, and it’s not negotiable on our jobs. Our technicians are background-checked and arrive in uniform, so you know exactly who’s walking into your home. A live person answers our phone 24/7 – no voicemail maze. And when a Delta line doesn’t fit the remodel you actually want, we install Kohler, Moen and Toto fixtures alongside the cabinetry and countertop brands we trust: KraftMaid, Wellborn, Cambria, Silestone and Caesarstone. Call (844) 560-4146 for your free estimate.
FAQs

No, as long as the fixtures are installed to Delta’s spec – voiding happens when someone modifies the valve body or installs non-OEM cartridges against Delta’s guidance. We follow OEM spec on every Delta installation, and our own 365-Day Done Right Promise sits underneath the manufacturer warranty so you have two layers of protection. Call (844) 560-4146 for a free estimate that spells out exactly what’s covered.
Often yes, if the valve body is in good shape – a trim kit swap is the cheapest way to modernize a Delta shower without touching the rough-in. We test the valve first: if the cartridge chamber is scored or the balancing spool is failing, a trim-only job is money spent on a valve that fails next year, and we’ll tell you so. Call (844) 560-4146 to schedule a free diagnostic.
We default to OEM on Delta cartridges, seals and trim because aftermarket kits we’ve tested in Garland’s hard water don’t hold up the same way. On some wear items the price gap is small enough that OEM is the obvious call; on others we’ll show you both and the number difference in writing. Either way, you decide before we order.
A full bathroom remodel typically takes two to four weeks; a shower replacement or tub-to-shower conversion usually runs five to ten working days. Lead times on specialty Delta trim and custom tile can add a week, and we flag that in the written schedule up front. Call (844) 560-4146 to get an honest timeline for your project.
Yes, and often that’s the right call – a cartridge replacement or faucet rebuild is a fraction of a remodel cost and buys you years. We diagnose the failure first, quote the repair in writing, and only suggest a remodel if the substrate or valve body is beyond saving. Call (844) 560-4146 for a free estimate.
Written by the team at Penhallow Remodeling Garland, serving Garland and nearby areas.












