







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom vs Stock Kitchen Cabinets in Garland, TX: What the Middle Tier Actually Buys You
For most Garland ranch kitchens, the right answer is semi-custom cabinetry from a line like KraftMaid or Wellborn, not full custom and not big-box stock. Semi-custom is built to your exact dimensions within a manufacturer’s spec range, uses a plywood box, and lands between $8,000 and $18,000 installed on a typical 15-20 linear-foot Garland run. Full custom is worth it only when your layout is genuinely unusual or you want a specific wood and detail that no production line offers. Everything else is a story stock and custom sellers tell to skip past the tier most Garland remodels actually land in. Call (844) 560-4146 and we’ll walk your kitchen through all three before you commit to one.

Why Garland’s Ranch Kitchens Make the Stock-vs-Custom Question Harder
Garland is built on 1950s-1970s single-family ranches and 1960s-70s tract subdivisions, most sitting on pier-and-beam or early slab foundations. That housing stock has a specific physical consequence for cabinets: the walls have moved. Expansive Blackland Prairie clay under Garland shrinks and swells with every wet-dry cycle, and a half-century of that movement racks walls slightly out of square. You feel it as a floor that dips near the hallway; you see it as a cabinet run that won’t sit flush.
Walk into a 1968 ranch off Saturn Road or a mid-century home near downtown Garland and you’ll find the same thing: a wall that’s out of plumb by maybe half an inch over an eight-foot run, a corner that isn’t a true 90 degrees, and a ceiling that slopes a quarter-inch. Stock cabinets are built to 3-inch width increments and assume a plumb wall. You fill the resulting gap with a filler strip, and the filler strip is exactly what makes a stock kitchen look like a stock kitchen.
Semi-custom widens the toolbox. KraftMaid and Wellborn both build to 1-inch width increments, and both offer scribe molding – a thin trim piece that gets shaped on-site to follow the actual wall contour, closing the gap cleanly instead of covering it with a flat board. Full custom solves the problem completely, because the cabinetmaker takes the field measurement and builds to it. But “completely” costs real money, and most Garland homeowners don’t need it.
The Three Tiers, With Numbers That Match a Garland Kitchen
Here’s the honest side-by-side, calibrated to a 15-20 linear-foot Garland ranch kitchen. These are installed prices, not box prices.
| Tier | Width increments | Finishes / door styles | Box construction | Installed cost (15-20 lf) |
|---|---|---|---|---|
| Stock (big-box) | 3-inch | ~8-10 finishes | Particleboard typical | $3,000-$6,000 |
| Semi-custom (KraftMaid, Wellborn) | 1-inch | 100+ door styles | Plywood box standard | $8,000-$18,000 |
| Full custom | Any dimension | Any wood, any detail | Plywood or solid | $18,000-$40,000+ |
Read that table against a full Kitchen Remodeling in Garland budget of $14,000-$45,000 and the semi-custom tier sits comfortably inside a mid-range project. Stock cabinets at $3,000-$6,000 leave room in the budget, but you’re buying the filler-strip look and a shorter box life. Custom at the top of the range can eat the entire budget before countertops, and that’s before we get to the countertop line, which typically adds $2,000-$6,500 depending on whether you choose Cambria quartz or a laminate.

The Plywood Question Matters More in Garland Than Most Places
Garland summers are hot and humid, and kitchen cabinets live through constant moisture cycling – steam from the cooktop, humidity from the AC cycling off and on, the occasional slow leak under the sink nobody notices for a month. Particleboard boxes swell at the edges when they take on water and don’t fully shrink back. Plywood does. The difference shows up as delamination at the bottom of a cabinet near the dishwasher, or as drawer-slide screws that stop holding after five years because the screw holes have wallowed out in soft board.
KraftMaid and Wellborn both ship a plywood box as standard construction. Big-box stock lines typically use particleboard. In a drier climate that difference is academic; in a Garland kitchen it’s the reason a semi-custom line often outlasts a stock line by a decade or more, even though both are called “cabinets.”
Semi-Custom Is the Value Play for Most Garland Homeowners
If you’re remodeling a 1960s or 1970s Garland ranch, you’re likely planning to stay in the home 10-15 years and you want the kitchen to hold up and look right. For that homeowner, KraftMaid or Wellborn semi-custom delivers roughly 90% of the custom result at 40-60% of the custom price. And it usually comes with a manufacturer’s limited lifetime warranty on the cabinet box and finish, which full custom shops commonly don’t offer because a one-off shop can’t warranty a product line.
Where we see semi-custom fall short is narrower than people expect. It’s when the homeowner wants a specific exotic wood, a hand-glazed finish no production line runs, or a built-in baker’s rack in a curved corner. If none of those describe you, the custom quote is money spent on a tolerance you’ll never measure.
Common Garland Scenarios We Walk Through
- A 1968 ranch near downtown Garland with a slight wall rack. Scribe molding plus 1-inch increments; semi-custom handles it cleanly without a full custom spend.
- A pier-and-beam home with a sagging sill under the kitchen window. Cabinets get leveled to the floor and the wall gets shimmed and scribed before boxes go in. We flag this in the written price so it never becomes a “we found something” conversation mid-job.
- A homeowner who wants a Cambria quartz countertop. Semi-custom cabinetry plus Cambria comes in well under the same kitchen in full custom with the same stone.
- A homeowner adding an island to a small 1970s tract kitchen. Semi-custom builds to the exact island length you want, not to the nearest stock dimension. An island in a Garland kitchen typically runs $3,000-$10,000 installed depending on size and door style.
Where the Written Price Comes In
The custom-vs-stock conversation usually falls apart on delivery day, when a contractor says the cabinet line was upgraded and the total moved. It doesn’t have to. Every Penhallow Remodeling Garland project carries the Kingswell Guarantee: a written price before any work starts, a defined arrival window, a clean job site, and a written 365-Day Done Right Promise that covers the work if something fails. The quote you sign specifies the cabinet line, the door style, the box construction, and the finish – by name – before a single box is ordered.
That’s the trade we’re offering. You get a written number, and it’s the number on the invoice. Technicians are background-checked and arrive in uniform, and a live person answers the phone at any hour – not a callback window. Our technicians have up to 22 years of experience, and the same crew standards apply whether you’re ordering KraftMaid or the entry-level line.
When you’re ready to see the full scope that cabinets sit inside, the Kitchen Remodeling page has the wider picture.
FAQs
Cabinet installation in Garland typically runs $4,000-$13,000 depending on the tier you pick and the linear footage. Stock boxes land around $3,000-$6,000 on a 15-20 foot run, semi-custom from KraftMaid or Wellborn runs $8,000-$18,000, and full custom climbs to $18,000-$40,000+. Call (844) 560-4146 for an exact quote – the estimate is free.
Refacing is usually cheaper than semi-custom replacement, but only if your existing boxes are solid and square. In a Garland ranch where the boxes are 50 years old and the walls have racked, refacing preserves the problem instead of fixing it. If the frames are still tight and the layout works, refacing is worth considering; if the boxes have absorbed water or the drawers don’t slide true, semi-custom is the better money. Call us and we’ll tell you which side of that line your kitchen is on.
Most Garland cabinet replacements run three to six weeks from order to install, with the install itself taking two to four days on a typical ranch kitchen. Semi-custom lines have a lead time of four to eight weeks depending on door style and finish; stock boxes can be installed in days. The written arrival window is part of the Kingswell Guarantee, and we hold to it.
We can usually schedule an assessment within the same week, and a live person answers the phone around the clock to book it. Cabinet decisions are worth a walkthrough rather than a phone quote, because the wall plumb and floor level change which tier makes sense. Call (844) 560-4146 and we’ll set a time.
If you’d rather have it looked at, Penhallow Remodeling Garland offers a no-pressure assessment in Garland – call (844) 560-4146. We’ll measure the walls, check the level, and give you a written price for each tier before you decide a thing.
Written by the team at Penhallow Remodeling Garland, serving Garland, TX.


